Blog
Feedback
Refer a Friend

The chart below shows the most common questions asked by owners of Detroit Diesel® engines 12V92 Turbo when trying to troubleshoot why their engines underperform.  It categorizes areas of possible malfunction, likely cause and recommended action to bring your new, rebuilt or used  Detroit Diesel® engine back to proper operation.  The chart will give you confidence when speaking with your Detroit Diesel® engine mechanic or ordering parts.  As a quick reference guide only, the chart must not be thought of as a substitute for the use of your Detroit Diesel® engine 12V92 Turbo natural Owner's operating or service manual.

Click Here To Send You This Free Guide

PROBLEM

POSSIBLE REASON

CHECK

Engine will not start Lack of air intake or restricted air intake
Broken blower shaft  
Worn out blower shaft  
Defective fuel pump  
Defective starter  
Discharged battery  
High exhaust back pressure  
Black smoke coming out of engine Defective injector  
Contaminated fuel  
Broken or worn cylinder parts  
Engine overloaded  
Faulty intercooler or aftercooler (for turbo engines only)  
White smoke coming out of engine Broken piston ring  
Incorrectly installed ring set  
Defective injector  
Fuel quality or grade  
Long idle periods  
Broken or bent push rod  
Injector or governor improperly adjusted  
Low engine oil pressure Water in engine oil pan  
Fuel in engine oil pan  
Defective oil cooler  
Engine overloaded  
Crankcase overfilled  
Low engine RPM Improperly working injector  
Governor calibration  
Hi engine RPM Governor calibration  
Engine overheating Defective fresh water pump  
Defective raw water pump (marine engines only)  
Defective thermostat or thermostat seal  
Clogged radiator or heat exchanger (marine engine only)  
Grey smoke coming out of engine Long idle periods  
Defective intercooler or aftercooler (for turbo engine only)  
Restricted air intake  
Defective injector  
Contaminated fuel  
Blower or turbocharger seals leaking  
Geartrain makes noises Low oil level  
Engine driven accesories  
Damage main or rod bearing  

Detroit Diesel 12V92 Usefull Information 

We have 12V92 Detroit Diesel parts you can rely on, at the lowest prices online. For over 10 years, we have offered high quality replacement parts that are built to last. We know you have many options when looking around for parts, and may be tempted to buy used from a classified. Before you do so, consider Diesel Pro. We carry a huge selection of brand-new parts, and our refurbished parts are professionally cleaned and assembled in our shop. All of our parts are stored in a climate controlled warehouse, and handled with gloves to keep the parts new and free of corrosion. When buying from a classified, the parts are usually pulled from an old vehicle, a junk yard or from some other undesirable source. Then there is the question of the financial transaction. Many of these parts are worth hundreds of dollars, and paying cash to an individual seller is risky, especially if you are buying parts that are in a questionable condition. With Diesel Pro, you can buy with confidence. We offer secure payment processing, with encryption backed by the high standards set by U.S. banks. Plus, your satisfaction is guaranteed. We offer an industry leading one-year warranty on new parts. And, if needed, you can return unused merchandise within 30 days. Try us and you will see, we are the best way to buy Diesel parts online.

This engine, like other Detroit Diesels, has both a serial number and a model number. The serial number will start with 12VF, such as "12VF1234". The model number is an eight digit code, and for this engine, the model number will always start with 816, such as "8162-7000".


General Information

The Detroit Diesel 12V92 is a two cycle engine with a displacement of 1104 cubic inches or 18.1 liters. This engine has 7 main bearings, a stroke of 5 inches and a bore of 4.84 inches.

The natural or non-turbo engine has an oil capacity of 28-36 quarts. With filters, the capacity will be slightly lower, or 26.5-34.1 quarts. The turbocharged engine has a capacity of 38 quarts, with a minimum of 26.5 quarts needed for proper operation.

For turbo engines:

Please note this information is based on engine performance with a 12V-TAB marine engine with a TW-83 turbo and a 1.19 A/R turbine housing.

The normal oil pressure is 60 PSI at 2300 RPM, and a minimum of 40 PSI is needed for proper operation. The temperature of the lubricating oil should remain at 250 degrees F or less.

The normal coolant temperature is 185 degrees F at 2300 RPM, with a maximum of 200 degrees F.

The compression (at sea level) is 500 PSI at 600 RPM, with a minimum of 450 PSI at 600 RPM.

Click Here To Go Back To 12V92 Turbo Categories


+
URL Copied Send Quote